Emerito 3.8 Capper Machine
-
Types Of Closure
Twist-Off & PT
-
Lids
Diameter: From TO27 to TO110
Height: Up to 18 mm (DTO) -
Containers
Diameter: From 30 mm to 160 mm (gallon)
Height: From 40 mm to 260 mm
High production equipment.
Capper machine for glass and/or pet jars for TWIST-OFF and PT type closing systems. Also PET jars with Twist Off lids depending on the quality and rigidity of the jar.
The Emerito 3.8 capper is equipped for the perfect closure of all formats commonly used in food processing, without the need for additional tools or utensils.
Our machine incorporates an exclusive, fully automatic, intelligent format changeover as standard, which regulates, with total precision, the height of the container, its width and the relative position of the side belts according to the height and shape of the format to be closed.
The time required for a format changeover between containers of maximum difference is 70 seconds.
An alternative version, the Emerito 3.8 ACT, is available for containers impregnated with oils or greasy substances and, thanks to its special configuration, guarantees 100% closure even in these extreme conditions.
Standard Version
330 units per minute | 19.800 units per hour
ACT Version
300 units per minute | 18.000 units per hour
Options
- Connection to rotary plate
- Lateral traction
- Steam management system
For feeding the containers to the packaging lines, as well as for accumulating
For container transport, with double belt.
For preheating the lids and for injecting steam into the equipment,
lo cual facilita la creación del vacío de seguridad.
Standard Components
• Automatic lid feeder by magnetic column.
• Lid positioner by mechanical selector.
• Lid presence‐absence detector in the feeder.
• Easy system for caps removal in hopper.
• Minimum level signal of caps in hopper.
• Universal caps drop, valid for all caps sizes.
• Exclusive “pre‐lid screw‐on control” system in the preclosing assembly.
• Fitting for steam inlet to pre‐heat the lids and facilitate the safety vacuum.
• Liquid recovery tray (cooling water, overflows, etc.).
• High‐end motorised headstock for changing format height.
• Dynamic elements synchronized with inverters.
• Independent and centralised controller.
• Lateral belts regulation from central steering wheel.
• Adjustable height from control panel.
• Side pressure bands for container transport.
An alternative version, the Emerito 3.8 ACT, is available for containers impregnated with oils or greasy substances and, thanks to its special configuration, guarantees 100% closing even in these extreme conditions.
Standard Version
330 units per minute | 19.800 units per hour
Versión ACT Version
300 units per minute | 18.000 units per hour
Standard Components
• Automatic lid feeder by magnetic column.
• Lid positioner by mechanical selector.
• Lid presence‐absence detector in the feeder.
• Easy system for caps removal in hopper.
• Minimum level signal of caps in hopper.
• Universal caps drop, valid for all caps sizes.
• Exclusive “pre‐lid screw‐on control” system in the preclosing assembly.
• Fitting for steam inlet to pre‐heat the lids and facilitate the safety vacuum.
• Liquid recovery tray (cooling water, overflows, etc.).
• High‐end motorised headstock for changing format height.
• Dynamic elements synchronized with inverters.
• Independent and centralised controller.
• Lateral belts regulation from central steering wheel.
• Adjustable height from control panel.
• Side pressure bands for container transport.
Options
Lateral traction for container transport, with double belt.
Connection to supply and/or storage plate
Steam management system for preheating the lids and injecting steam into the equipment, which facilitates the creation of the safety vacuum.